|
HP LASER PRINTERS ERROR CODE 80
- DEFECTIVE NETWORK CARD, OR FORMATTER BOARD.
ALL HP LASER PRINTERS
1. Improper MIO connection.
2. Replace the network cable.
2. Defective MIO / Network card.
3, Replace Network card.
3. Replace the formatter board.
HP LASER PRINTERS 1200, 2200, 3100, 3150 FAX, 3200 FAX, 4100
1. Temporary Printer error. Disconnect the power cable from the
product, wait at lest 30 seconds, reconnect the power cable, and then wait
for the product to initialize.
2. If error persists replace the formatter board.
HP LASER PRINTER 2300,
2410, 2420, 2430 ERROR 8X.YYY EIO ERROR 1.
The EIO accessory card has encountered a critical error. X resents the
error location, YYYY represents the error code.
2. Turn the printer power
off, and then turn the printer power on. 3.
Turn the printer power off, reseat the EIO accessory in slot X, and
then turn the printer on. 4.
Turn the printer power off, install it in a different EIO slot, and
turn the printer power on. 5.
Replace the EIO accessory in slot X
HP LASER PRINTER P3005,
3027M, 3035 ERROR 8X.YYYY 1.
The EIO accessory card has encountered a critical error. 2.
Turn the device off and then on. 3.
Upgrade the Jetdirect firmware. 4.
Try to determine whether the error occurs intermittently, while
printing, or when turning on the device. 5.
If the error appears while printing, determine whether it occurs when
printing from a specific computer, a specific application, or a
specific file. If all other computers, applications, or files can
print without the error, then the problem maybe only within one print
job or computer. Make sure the computer has the most current printer
drivers, or use a generic printer driver. 6.
If the error occurs when the device is first turned on, turn off the
device, disconnect the LAN cable, and then turn on the device. This
process will determine if errors occur from the network connection, If
errors do not appear when the LAN cable is unplugged, it is possible
traffic or signal on the network might be causing the error. Make sure
to try all solutions suggested, especially upgrading the Jetdirect
firmware. 7. Disable
the print server, For EIO print servers, remove the card. For embedded
print servers, use the SERVICE menu. 8.
if the problem persists, contact HP Support.
HP LASER PRINTER 3200
1. Disconnect the power
cable from the product, wait at least 30 seconds, then reconnect the
power cable and wait for the product to initialize. 2.
If the error persists, replace the formatter.
HP LASER PRINTER 4200,
4300, 4250, 4350 ERROR 8X.YYYY
1. The EIO accessory card in slot X has
encountered a critical error.
2. Turn the printer off and then on.
3. If the problem persists, reseat the
EIO card. 4.
Replace the EIO card.
5. Replace the formatter assembly. HP LASER PRINTER
4345MFP, 5025MFP, 5035MFP ERROR 8X.YYYY EIO ERROR 1.
The EIO accessory card has encountered a critical error. 2.
Turn the MFP off, and then turn the MFP on. 3.
Turn the MFP off, reseat the EIO accessory, and then turn the MFP on. 4.
Replace the EIO accessory. 5.
Replace the formatter. HP
LASER PRINTER 4345MFP, 5025MFP, 5035MFP ERROR 8X.YYYY INTERNAL JETDIRECT ERROR 1.
The embedded HP Jetdirect print server has encountered a critical
error. 2. Turn the
MFP off, and then turn the MFP on. 3.
If this message persists, see Network connectivity problems.
HP LASER PRINTER 4500
1. EIO error.
2. Replace the jet direct /
EIO card
HP LASER PRINTER 5100,
5200
1. The EIO accessory in
slot X has encountered a critical error.
2. Turn the printer off,
and then turn the printer back on.
3. Reseat, if necessary or
replace the EIO board.
HP LASER PRINTER 8500
1. Memory card error.
HP LASER PRINTER 9000, 9040,
9050MFP
1. Temporary network card error
2. Reseat network card in a
different EIO slot. 3.
Replace the network card.
|
