hp error code 64,support laserjet errors codes

Hp Error Code 64, Service Errors 64 Repair Tech Support

repair laser printer problems,service manual

 


 

HP LASER PRINTER ERROR CODE 64 - SCAN BUFFER ERROR

ALL HP LASER PRINTERS

1. Defective formatter board.

2. Replace the formatter board.

HP LASER PRINTER 5SI

1. Defective dc controller board.

2. Replace D.C. controller board.

HP LASER PRINTERS 1100, 1200, 2200, 3100, 3150 FAX, 3200 FAX, 4000, 4050, 4100

1. Temporary  formatter board.

2. Perform a cold reset.

2. Replace formatter.

3. Replace firmware Dimms.

HP LASER PRINTER 2300

1. A temporary scan-buffer  printing error.

2. Turn printer off and on.

3. Reseat jetdirect card - Network card.

4. Replace jetdirct card.

5. Replace formatter board

HP LASER PRINTERS 2410, 2420, 2430, P3005, 3027M, 3035

1. A temporary printing error occurred in the scan buffer.

2. Turn the printer off and then turn the printer on again.

3. If the message persists, replace the formatter.

HP LASER PRINTER 4200, 4300, 4250, 4350

1. A temporary  scan-buffer printing error.

2. Turn printer off and on.

3. Replace the formatter board.

HP LASER PRINTER 5000, 5100, 5200, 5025MFP, 5035MFP

1. A temporary  scan-buffer printing error.

2. Turn printer off and on.

3. Upgrade the firmware

4. Replace the formatter board.

HP LASER PRINTER 8000, 8100, 8150

1. A temporary  scan-buffer printing error.

2. Turn printer off and on.

3. Replace the formatter board.

HP COLOR LASER PRINTER 4500, 4550

1. Temporary scanner buffer error.

2. Clear Q in network.

3. Turn printer off then on. 

4. Replace Firmware Dimms.

5. Replace formatter board.

HP COLOR LASER PRINTER 4600, 5500

1. A scan buffer error.

2. Replace the firmware DIMMS.

3. Replace the formatter board.

HP COLOR LASER PRINTER 8500, 8550

1. Temporary scanner buffer error.

2. Clear Q in network.

3. Turn printer off then on. 

4. Replace Firmware Dimms.

5. Replace formatter board.

HP LASER PRINTER 9000, 9040, 9050MFP

1. Temporary Scan buffer error.

2. Turn printer off then on.

3. Replace laser scanner. 

4. Replace DC controller. 

 

 

Copyright © 2011 Advanced Laser Services, Inc.