hp error code 57,tech support problems

Hp Error Code 57, Service Errors Codes 57 Tech Support

laser printer services repair errors codes messages,

 


 

     

HP LASER PRINTER ERROR CODE 57 - FAN PROBLEM ON PRINTER / GEARS SEIZED IN PRINTER

HP LASER PRINTER ERROR 57 - MEMORY CARD ERROR

HP LASER PRINTERS 3, 3D
 
1. Incompatible memory card in front slot. 

2. Incompatible memory card in rear slot.

HP LASER PRINTERS 2P, 2P+, 3P 

1. Incompatible memory card in top slot.

2. Incompatible memory card in bottom slot.

3. Poorly seated motor cables or connectors.

4. Defective main motor. 

5. Defective D.C. controller board. 

HP LASER PRINTERS 5L, 6L 

1. Incompatible memory card.

HP LASER PRINTERS 4,  5, 4L, 5P

1. Main motor not functioning properly. 

2  Change the toner cartridge.

3. Change the main motor.

4. Change the D.C. controller.
 
HP LASER PRINTER ERROR CODE 57 - 57.2, 57.3, 57.4, 57.7

HP LASER PRINTERS 3SI, 4SI - 57.1

1. Gears seized. 

2. Faulty top cover switch. 

3. Faulty ac kill switch operation.

4. Improperly fitted connector on dc controller.

5. Bad main motor pca or main motor.

HP LASER PRINTER 4+ - 57.1

1. Gears seized. 

2. Bad Main motor.

3. Bad dc controller


HP LASER PRINTERS 3SI, 4SI, 4+,  5SI 

1. Faulty fan motor.

2. Fan on main body. 

3. Duplexer fan. 

HP LASER PRINTERS 1200, 2200, 3100, 3200, 4100 

1. Check the fan connector and make sure fan is not blocked. 

2. Replace the fan.

HP LASER PRINTER 2015 ERROR 57

1. Check the fan cable connections.

2. If the error persists, replace the fan.

HP LASER PRINTER 2300 ERROR 57.X

1. A fan error has occurred.

2. What ever the number after the 57 is the fan motor. Example 57.1 is Fan motor 1.

3. Replace the bad fan.

4. Replace the engine controller board.  

HP LASER PRINTER 2410, 2420, 2430 ERROR 57.XX

1. Printing error occurred in one of the printer fans.

2. Turn the printer off and then turn the printer on again.

3. If the message persists, check the printer fans and replace fans as necessary.

HP LASER PRINTER P3005 ERROR 57.03

1. A sub cooling fan (FM2) error has occurred. Fan operation is verified during device power up. Fan operation occurs only during power up or during a print job.

2. Turn the device off and then on.

3. Verify that nothing is hindering or blocking the fan.

4. Verify that the fan is connected to connector J512 on the ECU PCA. You might have to remove the main cooling fan to see this connection.

5. If the message persists, replace the fan.

HP LASER PRINTER P3005 ERROR 57.04

1. A main cooling fan (FM1) error has occurred. fan operation is verified during device power up. Fan operation occurs only during power up or during a print job.

2. Turn the device off and then on.

3. Verify that nothing is hindering or blocking the fan.

4. Verify that the fan is connected to connector J509 on the ECU PCA.

5. If the message persists, replace the fan.

HP LASER PRINTER 3027M/3035

1. Check the sub cooling fan (FM2) and main cooling fan (FM1)

2. Turn the device off and then on.

3. Check that nothing is hindering or blocking the fan.

4. Check all the connectors on the ECU PCA.

5. Replace the fan.

HP LASER PRINTER 3380, 3390, 3392

1. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize

2. Check the fan cable connectors.

3. if the error persists, replace the fan.

HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 57.3

1. A printer fan is not functioning.

2. Replace the fan 2.

3. Replace the D.C. controller.

HP LASER PRINTER 4300 ONLY ERROR 57.4

1. A printer fan is not functioning.

2. Replace the fan 1

3. Replace the power supply.

3. Replace the D.C. controller.

HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 57.7

1. The cooling fan in the optional duplexer is bad.

1. Replace the duplexer fan.

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP

1. A fan error has occurred on the printer.

57.01 = The DC controller fan is not functioning.

57.03 = The print cartridge fan is not functioning.

57.04 = The main fan is not functioning.

57.05 = The duplexing unit fan is not functioning.

57.07 = The reversing unit fan is not functioning.

2. Verify that the connection on the DC controller is firmly seated.

3. Listen for the fan to operate while the MFP is initializing

4. If the fan does not operate during the initialization sequence, replace it.

HP LASER PRINTERS 5000, 5100, 5200

1. Fan error. 

2. Change the bad fan out.

3. Change the D.C. controller.

HP LASER PRINTER 8100, 8150 ERROR 57.2

1. The fan 3 or the formatter fan has a error.

2. Replace fan 3.

2. Replace the D.C. controller board.

HP LASER PRINTER 8100, 8150 ERROR 57.3

1.The fan 2 or the low-voltage power supply fan has a error.

2. Replace fan 2

3. Replace the D.C. controller board.

HP LASER PRINTER 8100, 8150 ERROR 57.5

1. The fan 1 or the laser/scanner fan has occurred.

2. Replace fan 1

3. Replace the D.C. controller board.

HP LASER PRINTER 8100, 8150 ERROR 57.6

1. The fan 4 or the face down delivery ass'y.

2. Replace fan 4

3. Replace the D.C. controller board.

HP LASER PRINTER 8100, 8150 ERROR 57.9

1. The fan 5 or the tray 1 fan.

2. Replace fan 5.

3. Replace the D.C. controller board.   

HP COLOR LASER PRINTER 4500, 4550 ERROR 57.1

1. The printer has detected the exhaust fan is bad.

2. Replace the exhaust fan located in the upper rear left corner.

HP COLOR LASER PRINTER 4500, 4550 ERROR 57.2

1. The printer has detected the exhaust fan is bad.

2. Replace the exhaust fan located in the upper rear right  corner

HP COLOR LASER PRINTER 4500, 4550 ERROR 57.3

1. Replace the drum drawer ass'y.

HP COLOR LASER PRINTER 4600, 5500 ERROR 57.3

1. Replace the Fan motor ( FM3 ) cartridge fan.

2. Replace the D.C. controller board.

HP COLOR LASER PRINTER 4600, 5500 ERROR 57.4

1. Replace the Fan motor ( FM2 ) formatter fan.

2. Replace the D.C. controller board.

HP COLOR LASER PRINTER 4600, 5500 ERROR 57.7

1. Replace the Fan motor ( FM2 ) power supply fan.

2. Replace the low-voltage power supply.

3. Replace the D.C. controller board.

HP COLOR LASER PRINTER 8500, 8550 ERROR 57.1

1. Fan error. One of the cooling fans is bad.

2. Replace fan 1.

3. Replace the carousel motor.

4. Replace the main relay PCA.

5. Replace the power supply.

HP COLOR LASER PRINTER 8500, 8550 ERROR 57.2

1. Fan error. One of the cooling fans is bad.

2. Replace fan 2.

3. Replace the carousel motor.

4. Replace the main relay PCA.

5. Replace the power supply.

HP COLOR LASER PRINTER 8500, 8550 ERROR 57.3

1. Fan error. One of the cooling fans is bad.

2. Replace fan 3.

3. Replace the carousel motor.

4. Replace the main relay PCA.

5. Replace the power supply.

6. Replace the controller board.


HP LASER PRINTER 9000
, 9040, 9050MFP ERROR 57.1, 57.2, 57.3, 57.4, 57.5, 57.6

1. Temporary Printer error has occurred in one of the printers fans.

2.  Replace Fan motor that goes with the error code. EX. 57.1 means fan motor 1

4. Replace DC controller. 

 

 

Home | Error Codes | Hp Printers | Toner Cartridges | Hp Printer Accessories | Hp Plotters
 

Copyright © 2011 Advanced Laser Services, Inc.