hp error code 52,laser printer message

Hp Error Code 52, Service Errors 52,Scanner Printer Repair, Fuser

fix errors codes problems,fuser,troubleshooting tech support

 


 

     

HP LASER PRINTER ERROR CODE 52 – INCORRECT SCANNER SPEED ERROR

HP LASER PRINTERS 2, 2D, 3, 3D

1. Defective cable laser scanner to dc controller. 

2. Defective laser scanner assembly. 

HP LASER PRINTERS 2P, 2P+, 3P 

1. Bad scanner motor. 

2. bad dc controller. 

HP LASER PRINTERS 3SI, 4SI, 4V

1. Faulty cable assembly. 

2. Scanner motor problem.

3. Defective laser scanner assembly.

4. Defective dc controller. 

HP LASER PRINTERS 4, 4+, 5 

1. Faulty laser scanner cable. 

2. Defective laser scanner assembly.

HP LASER PRINTERS 4L, 4P, 5P, 5L, 5SI 

1. Temporary error. Scanner startup failure.

2. Improperly fitted scanning assembly.

3. Scanner cable problem.

4. Defective laser scanner assembly.

5. Defective dc controller board.

HP LASER PRINTERS  1100, 2100, 4000, 4050, 8000

1. Scanner start up error

2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ass'y.

3. Replace scanner ass'y.

4. Replace the engine board.

5. Replace the D.C. controller only on the 8000.


HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100

1. Temporary error. scanner rotation error.

2. Replace contact image sensor. 

4. Replace laser scanner. 

5. Replace cables to laser scanner and engine board

HP LASER PRINTER 2015

1. Check the laser/scanner cable connections.

2. If the error persists, replace the laser/scanner.

HP LASER PRINTER 2300 ERROR 52.X

1. A temporary scanner start up error.

2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.

3. Replace the scanner ass'y.

4. Replace the engine board.

HP LASER PRINTER 2410, 2420, 2430 ERROR 52.XY

1. A temporary printing error occurred.

2. Press the SELECT button to continue.

3. Turn the power off and then turn the power on again.

4. Reseat the connections between the laser/scanner and ECU

HP LASER PRINTER P3005 ERROR 52.00

1. A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of a print job.

2. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly.

3. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.

4. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated. You must remove the ECU in order to verify this connection.

5. If the message persists, replace the laser/scanner assembly.

HP LASER PRINTERS 3015/3020/3030MFP

1. The product has experience an internal hardware error.

2. Turn the power off and wait for 30 seconds then turn the power back on. connected on the formatter and on the laser/scanner.

3. Check the FFC connection between the formatter and the scanner.

4. Make sure that all flat, flexible cables (FFCs) are properly

5. Try connecting the product to a different power source or surge protector.

6. Replace the laser scanner assembly.

HP LASER PRINTER 3027M/3035

1. A laser/scanner motor error has occurred. Laser/scanner rotation is verified at the initialization of a print job.

2. Check that the laser/scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly.

3. Check that the laser/scanner motor connector is firmly seated in connector J402 on the ECU.

4. Check that the ribbon cable installed in connector J403 on the ECU is fully seated.

5. If message persists, replace the laser/scanner.

6. If after replacing the laser/scanner, the message persists, replace the ECU.

HP LASER PRINTER 3050, 3052, 3055, 3390, 3392

1. The printer has experienced an internal hardware error.

2. Turn the printer off and wait 30 seconds then turn the printer back on again.

3. If a surge protector is being used, remove it and plug the printer directly into the wall.

4. Check the FFC connection between the formatter and the scanner.

5. Try connecting the product to a different power source or surge protector.

6. If the error persists, replace the laser/scanner assembly.

HP LASER PRINTER 3200

1. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize.

2. Try connecting the product to a different power source or surge protector.

3. If the error persists, replace the contact image sensor.

4. If after replacing the contact image sensor, the error persists, replace the formatter.

HP LASER PRINTER 3300

1. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize

2. Try connecting the product to a different power source or surge protector.

3. If the error persists, replace the laser scanner assembly.

HP LASER PRINTER 3380

1. Disconnect the power cable from the product, wait at least 30 seconds, then reconnect the power cable and wait for the product to initialize

2. Make sure that the flat, flexible cables (FFCs) are properly connected on the formatter and on the laser/scanner.

3. Try connecting the product to a different power source or surge protector.

4. If the error persists, replace the laser scanner assembly.

HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 52.XX

1. Printer scanner speed error has occurred.

2. Replace laser scanner ass'y

3. Replace the D.C. controller ass'y

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP ERROR 52.XY

1. A temporary printing error has occurred.

52.0 = Scanner error.

52.1 = Scanner startup error

52.2 = Scanner rotation error

2. Turn the MFP off, and then turn the MFP on.

3. Reseat the connectors between the laser/scanner and DC controller PCA

4. Replace the laser/scanner assembly.

5. Replace the DC controller PCA.

HP COLOR LASER PRINTER 4600, 5500 ERROR 52.XK, 52.XC, 52.XM, 52.XY

1. Error code K - No Black Color.

2. Error code C - No Cyan Color

3. Error code M - No Magenta color

4. Error code Y - No Yellow color

5. Replace laser scanner ass'y

6. Replace the D.C. controller ass'y

HP LASER PRINTERS 5000, 5100, 5200

1. Printer scanner speed error has occurred.

2. Replace laser scanner ass'y

3. Replace the D.C. controller ass'y

4. Replace cable ass'y from scanner to D.C. controller.

HP LASER PRINTERS 8100, 8150

1.Laser scanner error/start up/rotation error

2.Replace laser scanner ass'y.

3.Replace D.C. controller board.

4.Replace cable ass'y from scanner to D.C. controller

HP LASER PRINTER 4500, 4550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner. 

3. Replace D.C. controller ass'y

HP COLOR LASER PRINTERS 4600, 5500

1.Laser scanner error/start up/rotation error.

2.Take the toners out and reseat them, or replace them

3. Replace laser scanner ass'y

4. Replace D.C controller board.

HP LASER PRINTER 8500, 8550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner motor.

3. Replace D.C. controller ass'y

HP LASER PRINTER 9000
, 9040, 9050MFP 

1. Temporary laser scanner error/start up/rotation error

2. Replace laser scanner.

3. Replace upper cable guide assembly.

4. Replace DC controller. 

 

Home | Error Codes | Hp Printers | Toner Cartridges | Hp Printer Accessories | Hp Plotters
 

Copyright © 2011 Advanced Laser Services, Inc.