|
HP LASER PRINTER ERROR CODE 51-
BEAM DETECT ERROR
HP LASER PRINTER 2P, 2P+, 3P
1. Improperly seated toner cartridge.
2. Improper laser shutter operation.
3. Damaged fiber optic cable.
4. Bad laser ass'y
HP LASER PRINTER 2, 2D, 3, 3D
1. Defective toner cartridge.
2. Bad cable from laser scanner ass'y to D.C. controller.
3. Cuts or kinks in fiber optic cable.
4. Defective laser scanner assembly.
HP LASER PRINTERS 3SI, 4SI
1. Defective toner cartridge.
2. Problem with fiber optic cable.
3. Faulty connectors.
4. Poor dc voltage.
5. Defective laser scanner assembly.
HP LASER PRINTERS 4, 4+, 5
1. Faulty laser scanner cable connectors.
2. Defective laser scanner assembly.
HP LASER PRINTER 4V
1. Problem with fiber optic cable.
2. Defective laser scanner assembly.
3. Defective D.C. Controller.
HP LASER PRINTERS 4L, 4P, 5P, 5SI
1. Temporary error.
2. Laser scanner assembly not seated.
3. Defective laser scanner assembly.
4. Defective dc controller pca.
HP LASER PRINTERS 1100,
2100, 4000, 4050
1.Beam detect error. 2.
Replace laser scanner ass'y. 3.
Replace Laser scanner cables from scanner to D.C. controller.
HP LASER PRINTERS 1200, 2200, 2300,2410, 2420, 2430, 3100 FAX, 3200 FAX, 4100,
4100MFP
1. Temporary error. / Bad toner cartridge
2. Laser scanner assembly not seated.
3. Defective laser scanner assembly.
4. Reseat cables to the laser scanner and ECU.
5. Bad engine board.
HP LASER PRINTER P3005
ERROR 51.XY 1. A
device error has occurred. 2.
Press the SELECT button to continue or press ?
for more information. 3.
If the message persists after exiting help, turn the device off and
then on. 4. If the
message persists, contact HP Support.
HP
LASER PRINTERS 3015/3020/3030MFP
1.
The product has experienced an internal hardware error.
2.
Turn the power off and wait 30 seconds and turn the power back on.
3.
Check the cabling connections to the laser scanner assembly.
4.
Try connecting the product to a different power source or surge
protector.
5.
If the error persists, replace the laser/scanner assembly.
HP
LASER PRINTER 3027M/3035 ERROR 51.XY
1.
A temporary printing error has occurred.
2.
Check the cable connections between the laser/scanner and the ECU.
3.
Replace the laser/scanner.
4.
Replace the ECU.
HP LASER PRINTER 3050, 3052, 3055, 3390, 3392
1. The printer has experience an internal hardware error.
2. Turn the printer off and turn it on
again.
3. If a surge protector is being used,
remove it and plug the printer directly into the wall.
4. Check the cabling connections to the
laser/scanner assembly.
5. Try connecting the product to a
different power source or surge protector.
6. If the error persists, replace the
laser/scanner assembly. HP
LASER PRINTER 3200 1.
The product has experienced an internal hardware error. 2.
Disconnect the power cable from the product, wait at least 30 seconds,
then reconnect the power cable and wait for the product to initialize. 3.
Check the cabling connections to the laser/scanner. 4.
Try connecting the product to a different power source or surge
protector. 5. If the
error persists, replace the laser/scanner. HP
LASER PRINTER 3300, 3380 1.
Disconnect the power cable from the product, wait at least 30 seconds,
then reconnect the power cable and wait for the product to initialize 2.
Check the cabling connections to the laser scanner assembly. 3.
Try connecting the product to a different power source or surge
protector. 4. If the
error persists, replace the laser scanner assembly. HP
LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 51.XX 1.
Printer has a beam detect error 2.
Replace the cable ass'y from scanner to D.C. controller 3.
Replace the scanner ass'y 4.
Replace the D.C. controller.
HP LASER PRINTER
4345MFP, 5025MFP, 5035MFP ERROR 51.XY
1. A temporary printing
error has occurred.
X=1 Beam detect error
X=2 Laser error
Y=0 Black laser
2. Turn the MFP off, and
then turn the MFP on.
3. Reseat the connectors
between the laser/scanner and the DC controller PCA (J83 and J84)
4. Replace the
laser/scanner assembly.
5. Replace the DC
controller PCA.
HP LASER PRINTERS 5000,
5100
1. A loss of beam detect
occurred.
2. Replace the scanner cables
to D.C controller.
3. Replace the scanner
ass'y
HP
LASER PRINTER 5200
1.
A laser beam error has occurred.
2.
Turn the printer off and then on.
3.
Verify the laser/scanner assembly is connected correctly to the DC
controller.
4.
If the error persists, replace the laser/scanner assembly.
5.
If the error persists, replace the DC controller.
HP
LASER PRINTER 8100, 8150 1.
Printer has a beam detect error 2.
Replace the laser scanner ass'y.
HP COLOR LASER PRINTER 4500, 4550
1. Defective laser scanner assembly.
2. Defective DC controller.
3. Defective wiring harness from the scanner to the dc controller.
4. Replace the scanner ass'y HP COLOR LASER
PRINTER 4600, 5500 ERROR 51.1, 51.2 1.
A beam detect error or laser error. 2.
Replace the laser scanner ass'y. 3.
Replace the D.C. controller board. HP
COLOR LASER PRINTER 4600, 5500 ERROR 51.X0 1.
No color on the print job. HP
COLOR LASER PRINTER 4600, 5500 ERROR 51.XK, 51.XC, 51.XM, 51.XY 1.
Error code K - No Black Color. 2.
Error code C - No Cyan Color 3.
Error code M - No Magenta color 4.
Error code Y - No Yellow color
HP COLOR LASER PRINTER 8500
1. Defective laser scanner assembly. 2. Defective wiring harness to the dc controller.
3. Defective DC controller.
4. Replace the laser
scanner ass'y
HP LASER PRINTER 9000, 9040,
9050MFP
1. Temporary laser ass'y error. Turn printer on and off
2. Replace the laser scanner assembly.
4. Replace the upper cable
guide ass'y
3. Replace DC controller board.
|
