|
HP LASER PRINTER ERROR CODE 21 – PRINTER OVERRUN
ALL HP LASER PRINTERS
1. Too complex print job.
2.Too much data or data too complex.
3. The
data dense text, rules, raster or vector graphics sent to the printer.
4. Turn
the image adapt and page protect to ON or AUTO to print the job. You might
have to turn them back to off on some printers it might degrade performance.
5. Not enough memory.
6. ADD
MORE MEMORY.
HP LASER
PRINTER 2200 ERROR 21
1. The print job was too complex for available printer memory.
2.
Press GO to resume printing.
3. If
you lose some data, you might need to add more printer memory. 4.
For a temporary solution, simplify the image or print at a lower
resolution.
HP LASER
PRINTER 2300, 2410, 2420, 2430
1.
The data sent to the printer was too complex. 2.
Press SELECT button to print the transferred data. 3.
If this message appears often, simplify the print job or install
additional memory.
HP
LASER PRINTER P3005, 5200 1.
The page compression process is too slow for the device. Some data may
be lost on the page. 2.
Press ▼
to see step by step information. 3.
To print the job with some data loss, press ?
to exit the message, and then
press SELECT button. If data is lost, simplify the page content to
reduce its complexity 4.
To exit, press ?.
HP
LASER PRINTER 3027M/3035
1.
The page formatting process was not fast enough for the device.
2.
Press OK to print the transferred data.
3.
Check the host configuration.
4.
If message persists, replace the EIO card.
HP LASER PRINTER 4100, 4100MFP, 4200, 4250, 4300, 4350
1. The data sent to the printer is too
complex.
2. Press GO to print the transferred
data.
3. Advice the customer to simplify the
print job.
HP LASER PRINTER
4345MFP ERROR 21
1. The page formatting
process was not fast enough for the MFP
2. Touch OK to print the
transferred data, some data might be lost. If this message appears
often, simplify the print job.
HP LASER PRINTER 5025MFP, 5035MFP
1. Page too complex, process was not
fast enough for the device.
2. Press OK to print the transferred
data.
3. Advice the customer to simplify the
print job. HP LASER PRINTER 5100
1. The data sent to the
printer was too complex.
2. Press GO to print the
transferred data, some data might be lost.
3. To print job without
losing data, from the configuration menu in the printer control panel,
set PAGE PROTECT=ON and print the job. Leaving PAGE PROTECT=ON might
degrade performance.
4. If this message appears
often, simplify the print job or leave PAGE PROTECT=ON
HP LASER PRINTERS
9000, 9040, 9050MFP
1. The page formatting
process is too complex.
2. To continue printing,
press OK
3. Simplify the print
job.
4. To print the job
without losing data, set PAGE PROTECT=ON in the configuration menu.
No not leave the PAGE PROTECT=ON or the print performance will
degrade. The normal setting is PAGE PROTECT=AUTO.
5. Add memory.
|
